I had a set of reinforcement plates for the door stays. The original studs were to short, so I drilled them out and used M6 hex bolts and nuts.
Next thing was to assemble the 993 mirrors. I hade to make a tool to compress the springs which pulls the mirror and base together. The flag mirrors got a hollow bolt, which can be screwed in or out. These push in and twist, which is impossible just by hand.
The next thing is the wiring for these mirrors. They are different from the flag mirrors. I had to add a relay in each mirror to make them work.
Now that all is working, including the power locks, power windows and mirrors, I can install the door panels. I made some door panel seals from thick plastic sheet.
Since this one is wider, I had to made some ducting, so the air will be forced through the cooler. I also added a fan.
Facebook Instagram Copyright © 2019, Engelbert Muelhaupt, All Rights Reserved, Designed by Engelbert Muelhaupt.